Dewalt Chisel
dewalt chisel
Flagstone Cutting Advice?
We are laying a 100 sq. ft. patio using 2 - 2-1/2 in. PA bluestone irregulars. These guys are big and weigh a ton (well maybe 80 lbs. to 150 lbs.) We wanted to go big since we don't want to deal with shifting and settling as much. Here's my question:
I am using a 4-1/2 in. Dewalt angle grinder with a diamond wet/dry cut wheel to score the stone from one side for my cuts. It can go a little over 1 in. deep on the first pass. When I use the stone chisel and maul to make the final break I keep having stones break completely perpendicular to my intended cut! It's driving me crazy!
I've considered renting a wet saw but the stone are way too big to pick up and down. Just moving these things is an effort. The angle grinder is nice because you can go to the stone.
Am I doing something wrong or is this just to be expected? I am doing the breaking in a sand bed to keep stress to a minimum.
I use my Milwaukee skill saw with a stone cutting 7 1/4 blade in it. I have put down countless stone patios and have found this to be the cheapest and most controllable way to cut the blue stone. Some times i run water on the stones when cutting,but most times i just cut and stay up wind of the dust.I cut all the way through the stone so not to have them break out of shape.The saw will cut up to 3 inches in depth so you will not have a problem. Good luck.
 dewalt chisel set dw5349 dw5350 dw5348 scaling cold bull point hammer drill chip US $33.88 
|
 SDS PLUS BULLPOINT FLAT WIDE CHISEL SET BOSCHHILTI METABODEWALT US $24.00
|
 DeWalt DW5838 Scaling Chisel US $9.99
|
 DEWALT DW5350 10 Inch SDS Plus Cold Chisel Bit US $.99
|
 DeWALT DWHT16063 4 Piece Short Blade Wood Chisel Chisels Set Chiseling US $34.99
|
 Lot of 5 DeWalt DW5771B15 Bull Point Chisels 18 Spline Shank New US $5.00
|
 DEWALT DT6826 SDS MAX HOLLOW GOUGE CHISEL US $47.41
|
 DeWalt DW5960 20 Bull Point Chisel 1 1 8 Hex Shank US $28.34
|
 DRILTEC SDS MAXTE Y WIDE BENT CHISEL BOSCHHILTIDEWALTFREE PRIORITY MAIL US $39.00
|
 DeWalt DW5838B10 DeWalt 3 Scaling Chisel SDS Max Shank Bulk 10 US $31.32
|
 DEWALT DT6826 SDS MAX Hollow Gouge Chisel 26 x 300mm US $22.99
|
 DeWalt DW5954B15 DeWalt 1 Inch by 20 Inch Cold Chisel 3 4 Inch Hex Shank US $19.49
|
 DEWALT DW5770 12 BULL POINT Chisel Round Spline Shank US $16.00
|
 DEWALT 10 Bull Point SDS Bit Chisel DW5348 US $16.00
|
 DEWALT 12 BULL POINT Chisel SDS Max Shank DW5832 US $20.00
|
 DeWalt DW5779B15 DeWalt 12 Cold Chisel 3 4 Hex x 21 32 Round Spline Shank US $18.60
|
 DEWALT 1 1 2 SCALING CHISEL DW5773 4702 US $24.95
|
 DeWalt DW5950B15 DeWalt 12 Inch Bull Point Chisel 3 4 Inch Hex Shank Bulk 15 US $16.86
|
 Dewalt DW5779 1X12 Hex Hammer Cold Chisel 21 32 Round Spline Shank US $11.95
|
 DeWalt DW5349 8 SDS Plus Scaling Chisel US $25.59
|
 DW5953 DEWALT Cold Chisel 12x1 HEX DEMOLITION US $9.99
|
 DW5954 DEWALT 18 X 3 4 Cold Chisel Hex Shank US $14.99
|
 DeWalt DW5780B15 DeWalt 18 Cold Chisel 3 4 Hex x 21 32 Round Spline Shank US $22.10
|
 DeWalt DW5773 1 1 2 x 12 Scaling Chisel Spline Shank US $24.24
|
 DeWalt DW5834 1 X 12 Cold Chisel SDS Max Shank for use with Hammer Drill US $15.99
|
 DeWalt DW5952 3 x 12 Scaling Chisel 3 4 Hex Shank US $27.66
|
 DeWalt DW5837 2 x 12 Scaling Chisel SDS Max Shank US $27.76
|
 SET OF 3 GENUINE DEWALT SDS PLUS CHISELS POINTED FLAT US $44.24
|
 DEWALT D25023 SDS PLUS D HANDLE 3 MODES ROTARY CHIPPING CHISEL HAMMER DRILL NEW US $149.99
|
 DeWalt DW5962 1 1 2 x 20 Cold Chisel 1 1 8 Hex Shank US $28.51
|
DEWALT D25899K 21 LB SDS Max Demo Hammer
dewalt chisel
Tagged with: dewalt chisel • dewalt d25899
Filed under: Dewalt Tools