Power Tools

Power tools are classified as either stationary or portable, where portable means handheld. They are widely used in industry, in construction, and around the house for cutting, shaping, drilling, sanding, painting, grinding, and polishing. Stationary power tools for metalworking are usually called machine tools.

As you are aware, Power Tools run on motors that either run on electricity or compressed air. The addition of this motor reduces the work you have to do, and even make it possible for you to do things that are difficult or impossible to do by hand. Power Tools include the drill, various types of saws, the router, the electric sander, and the lathe.

Power tools are commonly used everywhere, with many applications being found for their labor saving convenience. They have made many a small business possible, either by providing the means for construction and maintenance of a business space or providing the means to provide the service of the business, such as in the case of small contractors, plumbers, repair people and roofers; anyone who Hammers cuts, Drills and Saws for a living.

The modern home too benefits from power tools every day. From the simplicity and benefit of a battery-operated screwdriver for turning those hard to get to screws to the raw power and debris-eating appetite of a hopper, the power tool has made life much easier for the average homeowner.

The following advantages shall be taken into account when considering power tools.

· Reliability

· Manufacturer

· Power consumption

· Reputation of the products

The safety precautions to be followed while operating power tools are as follows:

· Do not use a tool in an explosive or flammable atmosphere

· Inspect the tool before using it to determine that it is clean, and all moving parts operate freely

· Do not load the tool unless it is to be used immediately

· Do not leave a loaded tool unattended, especially where it would be available to unauthorized person or children.

· Never point the tool at anyone.

· For eye protection wear safety glasses.

· For ear protection wear earplugs or domes

· Wear gloves for your hands.

· There should be a first aid kit in the factory or at the place of work.

Thus, you have the power to be a master of Power Tools to work for you in the best possible manner one can wish for. Enjoy the difference!



About the Author:

Every time you turn on any of your power tools you run the risk of catastrophic harm to your body. This sobering fact is always close to mind in the best woodworkers and other power tool using trades people, and it’s part of what keeps them safe. Furthermore, the safest people in the power tool using community know and follow the seven rules of power tool safety outlined for you below.

This article is not intended to replace the importance of reading the safety instructions in the manual that comes with every power tool… Be careful and be safe.

1) You Are The Most Dangerous Power Tool

Power tool users debate at great length about which is actually the most dangerous power tool. There’s widespread agreement however that the number one most dangerous power tool is the operator himself, as there are very few cases of any power tools leaping out to attack randomly. Remember that every time you turn on a power tool it’s you who are responsible for having the same number of fingers when you turn it off. This may seem like an obvious statement but it’s the arrogant, cocky and negligent power tool users who end up forgetting this cardinal truth.

2) All Tools are Equally Dangerous, but Some are More Frequently Harmful

Every tool in your tool box can be dangerous to you if you forget the cardinal rule, but some are definitely more frequent causes of trips to the emergency room. You should exercise caution especially when you pick up that box cutter of yours to break down some boxes. Also, the table saw is widely considered one of the most frequent manglers of fingers, as is the radial arm saw, the shaper and the chain saw.

3) Keep Your Tools Sharp, True, Clean and Running Smooth

Tool maintenance is another key factor in power tool safety. You should study the manual that comes with all of your power tools to learn how and how often you should be sharpening, aligning and cleaning your tool. And always be on the look out for changes in its operating function – listen for funny noises or any jiggles that may develop. These are signs that you need to spend some time getting your manual out and make some adjustments. A calendar in your shop that you can mark with tool maintenance times is a good idea too.

4) Keep Your Work Space Tidy, Well Lit and Distraction Free

Whether you’re working in your basement shop or a job site it’s vital that you keep it clean, well lit and free from distractions. The cleanliness and tidiness means that you won’t be tripping over any bits and pieces that you’ve left around. Get into the habit of cleaning up after yourself as you work and you’ll be well along your way to preventing any major problems with work-site accidents. Strong lighting too is vital to any power tool operation as the lighting is what keeps your fingers away from the blade and shows you exactly where blades are at all times. Get as many watts as possible on your next job and you’ll keep yourself out of the emergency room. Finally, make sure that there’s no music on that could distract you, or cell phones or anything else that pulls your attention away from where it needs to be.

5) Purchase or Make the Appropriate Safety Accessories

Woodworkers have their push sticks, feather boards and push blocks to make sure that they keep their cuts as true as possible while keeping their fingers away from the blade. Many power tools have common safety accessories and it’s up to you to make sure that you’ve learned as much as you can about each one and that you use it effectively to protect yourself from catastrophic injury.

6) Keep a First Aid Kit Handy

In addition to the normal stuff like bandages and peroxide you’re going to want to keep a couple of extra items handy that have a grizzly importance. Keep a plastic garbage bag handy for transporting any severed limbs with you to the hospital. Further, a hand mirror is vital for checking on your face in the case of a ****** injury. Have these items available and hope that you never have to use them.

7) Always Trust Your Instincts

Most power tool operators report a little twinge of conscience right before they get hurt on a power tool. A little voice or feeling that says “hm… this isn’t safe.” If you get that feeling then stop what ever you’re doing right away. Further, it’s often when people try old jobs in new ways – that they just make up on the spot without thinking through – that they get hurt too. So pay attention to that little voice inside of you and you’ll be much more likely to stay safe!

Remember – it’s up to you to keep yourself safe when using power tools. Always read the manuals and remember the seven rules of power tool safety!



About the Author: