Carbon monoxide (CO), a poisonous gas, is difficult to detect because it has no taste, smell, or colour. Effects of breathing in carbon monoxide include drowsiness, stomach and chest pains, and vomiting, and in some instances, CO poisoning is fatal. It is critical to act quickly if you suspect you or a family member has carbon monoxide poisoning because CO leaves the body rapidly, and test results will be inaccurate as soon as four hours after exposure to this poisonous gas.

Researchers at the University of London, under the direction of the HSE (Health and Safety Executive), revealed some startling statistics from a residential carbon monoxide study. One or more gas appliances were found to be defective in nearly 25% of homes in the study, and high risk of carbon monoxide poisoning was present in 8% of these homes. Nearly 50% of the residents in the study did not have adequate information about the health risks of carbon monoxide. Everyone living in a residence is at risk for a variety of ailments, paralysis, and death if basic gas safety rules are not followed. The lack of gas safety education is obvious; more than 60% of carbon monoxide-related deaths are the result of an improper response or the total lack of response to a gas appliance malfunction.

For gas appliance installations, repairs, safety checks, and maintenance, do not allow anyone except a CORGI-registered technician to perform the work. Only CORGI-registered service workers have the expertise and skills to safely and expertly complete a gas appliance job. Do not be tempted to hire any service technician for the recommended annual service checks for your gas appliances. Look for a CORGI-registered technician for this job, and use a qualified chimney sweep to give your flue a thorough cleaning every year.

In order for gas to burn safely, gas appliances and flues need to be in well ventilated areas. There needs to be a constant flow of fresh circulating through the area to ensure proper appliance operation. Do not place objects on top of or next to appliances, and make sure that all vents are kept unobstructed. Most carbon monoxide poisoning incidents in homes are the result of insufficient ventilation.

If you suspect your gas appliance is not operating correctly, turn it off immediately. Open any windows and doors in the area to allow fresh air to come into the room. Turn off the main gas supply line if possible. Signs of gas appliances that are not working properly include soot and stains around the appliances, pilot lights that will not remain lit, and a yellow-orange flame. For any questions, ring the National Grid on the Gas Emergency (0800 111 999) or HSEs Gas Safety Advice Line (0800 300 363).

By using sophisticated equipment, like infrared cameras and blower doors, energy auditors can help pinpoint hot and cool air leaks and areas in your home with inadequate insulation. Keep reading for answers to frequently asked questions about energy audits and how you can order one.

If I have a new home, do I need an energy audit?

Trained energy auditors inspect both new and older homes, and they know exactly what to look for. The investment in their time and services is usually well worth the cost and can pay itself back after just a couple of months of energy savings.

How much does it cost?

That depends on the auditor. Some companies include a free audit with a furnace tune-up or air duct cleaning. Meanwhile, some utility companies and state energy boards provide basic energy audits free of charge.

Exactly, what does an energy auditor do?

Some energy auditors provide a few services that go beyond a basic insulation audit. These experts often call themselves "house doctors" or "home performance contractors" and they'll look at your house as a complete system - evaluating each aspect and energy draw point.

Typically, they know how to improve a home's safety, indoor air quality, energy efficiency and comfort. Because construction flaws are often the cause of high energy costs, they can also identify safety issues or the causes of other problems, like air quality.

The energy auditor will do a full, room-by-room inspection of your home. He'll look inside your walls, your outlet covers, heating ducts, furnace systems and plumbing. His job is to be as thorough as possible and help identify ways for saving energy in your home.

How do I find an energy auditor?

For more information on energy auditors in your area, try contacting your state's energy office, your local utility company or asking a local contractor that you trust. You can also look online for auditors or companies in your area.

How do I prepare for an energy audit?

Start by writing down any rooms or areas of the house that you feel are particularly drafty or damp. Keep these notes on a list that you can give to the auditor. Also, compile at least a year's worth of energy bills and be prepared to answer questions about your household's energy consumption.

Regardless of your budget, one thing you need to consider in planning the job is that at some point in the future you may decide to sell your house. Ask yourself if the remodel add to the value of your home or make potential buyers run screaming from your house. Several real estate agents offer bathroom remodeling tips to make you house worth more. They advise against doing things that only you will appreciate, if future value is a concern.

Most partial remodeling projects include plumbing items like the sink, cabinets and possible the commode. Tub and tile usually remains, although some bathroom remodeling tips claim it is inexpensive to cover the tub and tile with a fiberglass unit which makes the entire room look new at a reasonable cost. Other bathroom remodeling tips include placing a small shelf along one wall on which to place pictures and small decorative pieces.

Consider How The Room Is Used

One consideration in any remodeling project is who will be using the room. Most bathrooms are under constant attack by family members and many bathroom remodeling tips include adding a second sink with a larger counter, if the room is large enough to accommodate one. This could allow two people to use the bathroom sinks at the same time.

The bathroom door is another consideration if a person in the home has mobility problems. Many bathroom remodeling tips suggest reversing the hinges on the door as a way of making access easier. You may also consider lowering the height of the countertop if a person has trouble reaching the top.

Since your bathroom and attic is typically the smallest room the house, packed with fixtures and hard objects such as a tub, sink and commode as well as a lot of moisture, there are many accidents, which occur in this one room. Some bathroom remodeling tips suggest a non-slip flooring as well as allowing enough room between objects to avoid trip hazards within the bathroom. It is suggested to plan for safety when remodeling the bathroom.

While many people are scared of starting a project for bathroom decorating because of potential costs, you should understand that even with a small budget, your can organize, update, freshen up and revitalize the look of your old-looking or plain bathroom.

Decorating bathrooms is as easy as repainting the walls, installing new wallpapers, adding accessories and updating your existing furniture. If you have unlimited budget, you can also update your tiles, add new light fixtures and install bathtubs or other luxurious equipments.

Regardless of budget, it is important that you sort out the existing items in the bathroom and determine which items you want to keep and which items can now retire. Clearing out unimportant clutter from the bathroom can help you decorate the room easily and match items for your new theme.

Three Common Themes for Your Bathroom Decorating Project

You can choose from a traditional, contemporary or country themes for your bathroom decorating based on your taste and desired look. If you wish to decorate your bathroom to evolve into a sanctuary, you can implement a traditional design into the bath or toilet area. Traditional styles can easily add elegance when you add draperies to a window, install floral fabrics and add gold or silver accents.

Although the result of traditional bathroom decorating can look expensive, you don’t need to buy expensive materials to capture the theme you want. However, if your existing bathroom already has a traditional motif, you can update the look and feel of the room by going for contemporary designs.

Contemporary bathroom and attic decorating involves wood finishes, clean lines and other modern accents. Many modern bathrooms include natural stones, tiles and wood to provide a calming feel. When you choose a contemporary theme, you can rely on simple fixtures and accessories that result in a dramatic overall look for the bathroom.

If you love natural materials and neutral colors, you can choose a country theme and decorate your bathroom with natural colors, forms and fabrics to give warmth to simple flooring or wallpapers and plumbing items. You can decide on putting rich colors to accent neutral colors and give a dramatic effect to the room, but still offer a relaxing effect.

Decorating bathrooms can easily give a new life to your old and rugged bath and toilet area. By choosing a theme to fit your personality, you can enhance the look of the bathroom and provide a haven for you and your family.

Never use a sealant that is not designed for what you are doing. Sink flanges on a garbage disposal unit should be secured with plumber's putty. There are types of special wax or grease sealants that are suitable to be used on the base of the toilet. Shower pipes and spouts should be sealed with caulking, and the list goes on from there.

Many people regret substituting the wrong sealant for a particular job. PVC pipe glue should not be used for applications designed for plumber's putty. If you use these things rather than Teflon plumber's tape on hoses, you will never be able to remove it should you ever decide to replace the hoses.

Be sparing but not stingy. It's also important to use the right amounts. For example, a ¼ inch bead of plumber's putty is sufficient to seal around a sink. Too much will require quite a bit of clean up. If you don't use enough, the water will be able to leak in under the sink.

Wipe away the extra without removing too much. If too much sealant is used, it will tear or split after it dries. Using your finger or a damp sponge, lightly wipe away any extra and you should be fine. Also, make sure you clean up any smears before they dry.

Be generous with Teflon plumber's tape. Usually you cannot use too much, but in rare cases, it could create small channels for the water to escape through. The reason it's so hard to overdo it is because it is very flexible and compressible. Obviously, you don't want to put so much on that it becomes difficult to fit the new pipe or hose on.

Wind it in the proper direction. If you're dealing with hoses, direction won't be an issue, but you'll need to make sure it's in the proper direction if you are planning to use it on threading pipes. If it's not done correctly, the tape will twist off. The tail of the tape should be facing the direction you will be threading onto it. This will create a good seal as the tape stretches in the same direction the pipe is being threaded. If the tape twists the other way, you will not have a good seal at all.

Avoid torn ends. Try to avoid tearing the tape or biting it off with your teeth. It can seem like a good idea if you are working in a cramped space that is hard for you to move around. This can lead to stretching and tearing of the ends. If the tape is stretched too much before it is threaded on the pipe, it will not seal correctly.

If the tape is cut cleanly, it will set in the threads better and not leave any ridges that could cause leaks. This should be done on the front and back of the tape. If you have ridges, you will create small openings for water to escape from.

If you use the correct sealant for each job and follow the directions when doing it, your plumbing projects will be well sealed and leak free.

Click on the links to get more tips and guide on How to Do It Yourself Plumbing, Home Plumbing Repair and Plumbing Kitchen Sink.

The Owens Corning system is one of the easiest ways to finish a basement, and on average, finishing a whole basement can be started and completed in two weeks using this system. Basements are notorious for moisture. Common basement finish materials are drywall and wood, even though these materials are easily damaged by water. Mold and mildew can grow in these materials when moisture accumulates over time. Upper respiratory health is affected negatively by exposure to mold and mildew.

While the system is moisture resistant, it cannot be used as a moisture barrier for your home. If you have existing water problems they need to be treated prior to installation of this system. Under normal circumstances these panels are able to accommodate high humidity which makes them an excellent choice for basement finishing materials.

An Owens Corning basement finishing system is made of mold and mildew resistant materials. This system not only creates beautifully finished walls, it puts a mold and mildew barrier up for the safety of you and your family. In addition to the mold and mildew resistant features, this basement finishing system also has acoustic properties and flame resistant properties.

When rooms in your basement sound like you are talking in a cave it makes it difficult to enjoy your favorite television program or to work out in your basement gym. The Owens Corning basement finishing system panels are made up of an acoustic insulation that provides 75% sound absorption. The acoustic abilities allow you to enjoy the sound system in your basement home theater.

This system not only insulates acoustically. Thermal insulation is also provided which can create a more energy efficient home. In fact in some areas installing this basement finishing system can actually make you eligible for energy tax credits.

The system is made up of several panels that are fitted easily into a system of rails, and includes the moldings, rails and the panels. Ceiling finishing is not included in the system, although in some areas the certified installers may be able to assist in ceiling finishing as well.

This system can save you money on construction in the long run. When the basement finishing system has been installed it is easy to remove single panels when needed. This is important as it allows homeowners to check their foundation and do any repairs needed to pipes and/or wiring at their convenience. If you do need to get to the foundation for any reason, all that is required is the simple removal of one panel. Once you are finished with whatever repair or inspection work you were doing the panel is simply snapped back into place.

Ready for your next basement makeover?

Many people have discovered the advantages provided by a portable spa tub compared to having a fixed installed one. First of all, portable hot tub spas are less expensive than installed hot tubs. With mounted hot tub spas that are meant to be a permanent fixture in a home, remodeling expenses can be very high. Portable hot tub spas are much cheaper because they are not meant to be permanently fixed in one location. There is no need for plumbing connections, because the tub can be filled with a garden hose, and are heated electrically.

A portable whirlpool hot tub is the perfect choice for those who do not have the unused space in their houses for a permanently fixed spa tub. You can even relocated these portable tubs from one location to a new one, whenever the mood strikes. If you want to enjoy your hot tub at a NASCAR race, you can set up your portable tub there and party to your heart’s content. However, if you want to unwind in a more private setting, you can easily transfer your portable spa tub onto your deck without the hassle of difficult re-installation.

If you are the kind of person who needs the luxury of rest and relaxation in the convenience of your home without the high cost, a portable hottub is sure to deliver the best choice in comfort at an economical expense. There is no need to remodel your home, or to hire plumbing and wiring experts if you want to have your very own hot tub. Now, you can even bring your hot tub with you wherever your heart desires, whether within your private compound or on camping trips. Portable hot tub spas are certainly a wonderful substitute for the more expensive custom hot tubs.

Sump Pump Installation
Today, people don't want to buy a run down house where the paint is peeling. Nobody wants to invest in a house whose with leaky plumbing. You would not wish to get into a project requiring major home plumbing construction or sump pump installation issues. Having observed this, if one is planning to sell a house, home improvement is essential to realize a good price on the sale of your home. These days package appearance is everything. If the house you are selling does not appear neat and trim, the chances of your selling it at a satisfactory price will be much lower.

This is one of the reasons why home improvement loans have become a frequent practice. Now it seems that we all want to increase the value of our home and property by carrying out home improvements. Apart from looking nice, a well cared for home is also a better investment. A neat well maintained looking home is valued at a higher price and will also facilitate better deals if you apply for a personal secured loan. An unsecured loan is not the most difficult to get, but they usually come with a higher interest rate and require a better credit rating. In most cases it is acceptable to apply for an unsecured loan but if you have a house to offer as collateral, a secured loan is usually a better option.

DIY Home Improvement
This brings us to the issue of financing home improvements. If you own a house, you could opt for a secured home improvement loan. This will allow you to secure lower rates of interest and you will most likely be able to borrow a greater amount. If you are still in the process of paying down a current mortgage, you could also opt for a home equity loan. Home equity loans allow you to leverage the equity value of your home. This advance of funds can then be used to finance other costs such as education, emergencies or home improvements.

Ultimately, it will all come down to how you would like to finance your do it yourself home improvements. Think it out well and do some research on all your options. Banks and credit unions are only too happy to help you secure a personal secured loan, home equity loans and home improvement loans.

If you've decided that installing a bathtub is the only option, you should learn how to install a bath tub. If you have the appropriate plumbing and construction knowledge, or know someone who does, the first step is to assemble the necessary tools for the job.

A bath tub installation will require some basic tools that you will most likely already own, such as a hammer, level, nails, screws, tape measure, hacksaw and drill. Other parts and tools may have to be purchased for the job, such as a tube cutter, propane torch, PVC pipes, plastic shims and, of course, your new bath tub. Safety equipment, such as goggles, should always be worn whenever necessary during the project.

When installing a bath tub to replace an existing unit, the old bath tub needs to be disconnected and removed. It's best to choose a similar size and style of bath tub, so no additional framing or alteration of original water supply lines needs to be performed.

Using as much assistance as is necessary, place the new bath tub into place and use shims to level it. Support boards should be present under the rim of the bath tub to help support its weight. After the bath tub is leveled and is adequately supported, the next focus is to connect the necessary plumbing.

The steps needed to connect the plumbing will depend on what is already present from the previous bath tub. The drainpipe may have to be cut to fit, so that it connects to the trap, which should be centered below it. Reconnect all of the plumbing fixtures in the same manner as the previous bath tub was disconnected.

After turning on the water and testing the entire system, it may need to be inspected, depending on building code regulations. After completing any necessary inspections, the final faucets and handles can be connected and the surrounding walls can be refinished and caulked.

Although the process of bath tub installation can be complicated, once you learn how to install a bath tub, you can save a great deal of money by completing the task yourself. If you have the right tools and supplies available, along with some assistance to move the bath tub, the entire process can be completed in as little as a day.

It isn't just the quality that makes the Craftsman power tools so popular but the wide variety of power tools they offer that also helps to make Sears the one stop shop for all your power tool needs. The Craftsman power tools have a wide range of table tools like their high volume wood lathe and their very popular table saw. If you are putting in a floor or doing some plumbing they have their tile and cut off table saws available to make any job easier. For finishing work they also have a wide variety of quality table sanding machines that can run the range from low end work to high volume as well. Their quality and manufacturing is second to none and Craftsman power tools are quickly finding their way into the workshops of the world.

When You Need That Power In Your Hands

The Craftsman name is not only famous for its table saws and lathes but there is also the huge variety of hand held non-power tools that Craftsman is really known for. A Craftsman screwdriver is said to last a life time and if you check any grandfather's tool kit you are more than likely to find a Craftsman tool he bought when he was a young man that he still uses to this day. Screwdrivers, hammers, wrenches, and grips are just some of the hand held tools that Craftsman is famous for the world over.

When it comes to power tools few can match Craftsman power tools for quality and durability. The cordless drills and the whole set of cordless Craftsman power tools are convenience products that make any job easier and can help you to make your project look like it was done by a professional.

Different Kinds of Power Tools

Some of the Milwaukee Power Tools are the reciprocating saws, lithium-ion cordless tools, drills, portable band saws, circular saws, driver drills, hammer drills, rotary hammers, pneumatic nailers, grinders and sanders.

Saw Blades

The reciprocating saw blades are one of the latest introductions to the range of Milwaukee Power Tools. This new generation of blades is designed to handle the toughest metal possible. So they are used by repair or maintenance tradesmen or for cutting applications used in the automotive and plumbing line. The blades have a bi-metal construction and they can withstand shock, fatigue and shattering. They are even heat resistant.

All saw blades which are a part of the Milwaukee Power Tools undergo a cryogenic heat treat process. This brings about a permanent change in the microstructure of the high-speed steel cutting edge. This heat process penetrates the full depth of the blades by which their hardness is improved; they become wear-resistant and dimensionally stable.

The blades have precision-ground teeth and are optimized for metal cutting. Because the back face is radiused, the tool strength of the blades is increased, its life becomes longer and it cuts faster.

Drills

The Milwaukee Power Tools also include drills and hammer drills. Everything is heavy duty and the drills feature the best power to weight ratios, all metal gear cases and diaphragms for maximum gear support, heavy-duty switches and heavy-duty keyed and keyless chucks. Just the heavy duty drills have such a large variety: the close quarter drills, the compact and super hole shooter drills, the D-Handle drills, the hole hawgs, the right angle drills and the magnetic drill presses.

Besides the saws and drills Milwaukee Power Tools includes impact wrenches, diamond coring equipment, grinders and metalworking hammers, lifting tools and nibblers and shears.

The New Compact Driver

The new 12-volt sub-compact driver is ideal for a number of applications like electrical work, installation, finish carpentry and drilling and driving tasks. It does the job of the power tools because it is powerful enough to drive 130 screws, each 3" long, in a single battery charge and provides the speed of 500 RPM to finish jobs faster. It has the legendary durability of all Milwaukee Power Tools, but it is lightweight and ideal for professional users to carry around comfortably. This new driver features more power, more speed and the longest runtime available in its category.

Ridgid power tools was born in 1923 and they take the same pride in their products now that they did when they first started. Each Ridgid power tool that bears the Ridgid name must undergo a very long series of tests that includes testing under field type conditions that will tell Ridgid whether or not the tool they are making is worthy of being called a Ridgid or not. It is really no wonder that the one brand of power tool that prides itself on real world testing and application engineering is also one of the most popular power tool brands available on the market today and that brand is Ridgid.

From Plumbing To Power Tools

If you do not recognize Ridgid power tools that may be because you are used to seeing the Ridgid name on the line of products it has worked tirelessly to make its hallmark. Ridgid is know for its quality plumbing products from pipe and tubing tools to its general drain maintenance line of products. From there Ridgid moves into Ridgid power tools and offers such reliable tools as routers, table saws, and drills all backed by the only lifetime power tool warranty in the entire industry.

Ridgid is a company that is always growing and expanding and they are always mindful of the customer. Their website is full of information on the industry first lifetime power tool warranty plus you can find any one of their many global service locations. They also have an area where Ridgid owners can compare notes on one of the most reliable power tool names in the world.